Purpose and field of application
The device is used together with PC and designed for medical treatment of various diseases by methods of electropuncture. Electrostimulator provides: acupuncture points locating based on maximal electrical conductivity of patient's skin area...

Technical information
The software of the device provides: keyboard input of patient profile data(name, date of birth, diagnosis, additional information); automatic input of the date of the session; PC display visualization of ongoing session modes, as well as saving session modes' data...

List of components
The article includes table with names of electrostimulator components. Acupuncture needles are not supplied. It is recommended to apply individual (separate for each course of therapy) needles which are resistant to electrolysis...

The device and its principle of operation
The electrostimulator is functioning when connected to IBM-PC compatible computer. The minimal requirements for configuration of PC used are: processor Intel 386SX33 or analogous; RAM 4 Mb; free disk space not less than 10 Mb...

Installation procedure
and safety instructions
Locate the desk, with PC and EU on it, near the place for patient (considering that the length of cable for electrode is equal to 1,5 m). Connect the computer casing to the grounding mat available, using the cable with 1,5 mm ² section and EU grounding cable ...

Operating procedure
The components of the electrostimulator should be disinfected (i.e. double-cleaned with the napkin moistened in 3% hydrogen peroxide; the interval between cleanings should be 15 min). Before the session starts, ensure...

Therapy schemes for some diseases
This page contains base schemes of medical treatment, which showed themselves effective when using KES-01-"MIDA". The algorithm of stimulation is individual for each patient and developed considering general acupuncture principals...